Easy Cleaning Guide for Control Ring Collection

Overview

At KA Designs, we are dedicated to providing tools that prioritize precision, safety, and hygiene. This guide outlines effective cleaning protocols to help you maintain the cleanliness and functionality of your Control Rings.

Although the Control Rings are durable beyond three patient sessions, we recommend these protocols to maintain the utmost degree of hygiene and safety. These recommendations reflect best practices and align with industry standards for non-invasive, external-use medical accessories.

Single-Use vs. Multi-Use

Single-Use (Recommended)

  • For optimal hygiene and convenience, we recommend single-use of the Control Ring.
  • Dispose of the ring after a single session to maintain the highest cleanliness standards.
  • Follow local medical waste disposal regulations when discarding used Control Rings.

Multi-Use (Validated for Up to 3 Uses)

  • If reuse is necessary, Control Rings can be safely cleaned and disinfected for up to three uses.
  • Follow the cleaning instructions below to ensure proper hygiene and performance.

Cleaning Instructions

Step 1: Rinse

  • Rinse the ring under warm (not hot) water after use.
  • Remove any visible residue or debris.

Step 2: Disinfect

Option 1: Submersion Method

  • Soak the ring for 10–15 minutes in one of the following disinfectants:
    • 70% Alcohol (Rubbing Alcohol or Isopropyl Alcohol)
    • Diluted Bleach (1 part bleach to 9 parts water)
    • Medical-grade disinfectants:
      • CaviCide™ – Broad-spectrum disinfectant, effective against bacteria, viruses, and fungi.
      • Opti-Cide3® – Fast-acting disinfectant with 2-minute kill times, safe for plastics.
      • Sani-Cloth® AF3 Wipes – Alcohol-free, gentle, and effective for quick disinfection.
      • Dispatch® with Bleach – EPA-registered cleaner suitable for sensitive materials.
      • Virex II 256 – Hospital-grade disinfectant with minimal residue and fast action.

Option 2: Wipe Method

  • Use alcohol wipes or medically approved disinfecting wipes.
  • Ensure all surfaces, including crevices, are thoroughly cleaned.

Step 3: Rinse and Dry

  • Rinse off any remaining disinfectant with warm water.
  • Allow the ring to air dry completely or pat it dry with a lint-free cloth.
  • Store in a clean, sealed container until next use.

Maintenance and Replacement Tips

  • Maximum Usage Limit: Use the Control Ring for no more than three sessions before replacing it.
  • Inspect Before Use: Check for discoloration or loss of fit. If the ring no longer clicks securely into place or has a loose connection, discard and replace it.
  • Avoid Harsh Chemicals: Do not use hydrogen peroxide concentrations above recommended levels or strong acids, as they may damage the material.
  • Durability Note: While the Control Rings are designed to last beyond three sessions, adhering to these protocols prioritizes hygiene and performance over extended durability.

Frequently Asked Questions

Q: Can I use alcohol wipes for cleaning?
A: Yes. Alcohol wipes are effective for quick disinfection and are safe for use with the Control Ring.

Q: Are the Control Rings FDA-approved?
A: The Control Rings are manufactured using FDA-compliant materials. However, they are not FDA-approved medical devices. The cleaning protocols outlined follow FDA and CDC guidelines for non-invasive medical accessories.

Q: What happens if I use the ring more than 3 times?
A: The material may lose strength or fail to fit properly. We recommend replacing it after 3 uses to ensure safety and performance.

Support and Contact

For assistance or more information, contact us at admin@karingdesigns.com.

For updates, visit: controlrings.com/cleaning-guide.

Disclaimer

  • KA Designs Control Rings are non-sterile, external-use accessories designed to enhance syringe functionality during injection procedures. These products are intended for professional use only and must be inspected before each use for signs of damage or wear.

 

  • Cleaning and disinfection protocols outlined in this guide are based on CDC and FDA recommendations for non-invasive, external-use medical accessories. However, compliance with these protocols does not guarantee sterility.

 

  • User Responsibility: Users are solely responsible for cleaning, maintaining, and inspecting products prior to use. KA Designs assumes no liability for improper cleaning, failure to follow protocols, or use beyond the recommended 3-session limit.

 

  • By using this product, users accept all associated risks and agree to follow local medical waste disposal regulations and safety practices.